PHOENIX – 1501252 – Electrical Connectors-Contactors – ICDC-040106 – New
Main Category: Electrical | Sub-Category: Connectors-Contactors | Status: New Original Components
PHOENIX Part Number: 1501252 | ICDC Internal Part Number: ICDC-040106
1501252 Description:
Connector – SACC-M 8MS-3CON-M-SW
1501252 PHOENIX
Connector, Universal, 3-position, Plug straight M8, Coding: A, Screw connection, knurl material: Nickel-plated brass, external cable diameter 3.5 mm … 5 mm
Assembly instruction: NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
Product type Circular connector (cable-side)
Number of positions 3
No. of cable outlets 1
Shielded no
Coding A – standard
Cable outlet straight
Insulation characteristics
Overvoltage category III
Degree of pollution 3
Degree of protection IP67
Ambient temperature (operation) -40 °C … 85 °C (Plug / socket)
Dimensional drawing
Width 12 mm
Height 12 mm
Length 50 mm
External dimensions
Outside diameter 3.5 mm … 5 mm
Housing
Diameter housing 12 mm
Insertion/withdrawal cycles ≥ 100
Connection 1
Head design Plug
Head cable outlet straight
Head thread type M8
Coding A-coded
Rated surge voltage 1.5 kV
Contact resistance ≤ 3 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 48 V AC
60 V DC
Nominal current IN 4 A
Flammability rating according to UL 94 HB
Sealing material NBR
Material of grip body PBT
Contact material CuZn
Contact surface material Au
Contact carrier material PA
Cable gland material Nickel-plated brass
Conductor connection
Connection method Screw connection
Connection cross section 0.14 mm² … 0.5 mm² (without ferrule)
0.08 mm² … 0.5 mm² (with ferrule)
0.14 mm² … 0.5 mm² (solid)
Connection cross section AWG 26 … 20 (without ferrule)
Tightening torque 0.2 Nm (M8 knurl)
0.5 Nm (Connector with coupling sleeve)
0.3 Nm … 0.4 Nm (Pressure screw for outer cable diameter 3 mm … 4 mm)
0.8 Nm … 1 Nm (Pressure screw in the case of external cable diameter 4 mm … 5 mm)
0.1 Nm (Screw terminal blocks)
Assembly instructions The wires can be connected both with ferrules (without insulation) and without ferrules.
M8
Standards/specifications IEC 61076-2-104
Signal type/category Universal
Stripping length of the individual wire 4 mm
Contact us to discover 1501252. ICDCSPARES.COM offers new or overhauled original components, ready in stock to be shipped via DHL Express! Call us!
Check our Electrical section to discover more about ICDC catalog: a large selection of industrial spare parts including Fuses, Electric Motors, Switches and Connectors-Contactors.
Are you looking for industrial Connectors-Contactors?
ICDC offers online a wide selection of Connectors-Contactors of the most important OEMs like EATON, ABB and DANFOSS, besides PHOENIX.ICDC, Your Industrial One Stop Shop for Components!