BECKHOFF - EL6910 - Electronic Modules | ICDC-041541

BECKHOFF – EL6910 – Electronic Modules | ICDC-041541

Main Category: Electronics | Sub-Category: Modules | Status: New Components in Original Box
Manufacturer: BECKHOFF | Part Number: EL6910 | ICDC Part Number: ICDC-041541
Lead Time: 2 Days to Shipping + DHL Express Transit Time

EL6910 Description:

EL6910 | EtherCAT Terminal communication interface, TwinSAFE Logic
The EL6910 represents the new generation of dedicated safety controllers. While the EL6900 as its predecessor provided only function blocks based on Boolean values, the EL6910 offers a wide variety of certified function blocks that enable the safe processing of analog values and thus the implementation of even more complex safety applications.

In addition to the extension of the processable data types, the so-called customizing function has been established in order to be able to appropriately map current requirements for non-safety-oriented applications with regard to modularization and dynamization in the field of safety technology too. Customizing allows modules of the safety application to be configured so that they are capable of being permanently or temporarily disabled. The disablement or re-enablement can also take place subsequently at runtime.

The EL6910 TwinSAFE Logic can establish 212 connections to other devices. In addition to safe communication connections via FSoE, connections via PROFIsafe are also possible (master and slave). TwinSAFE SC technology is also supported. This technology allows analog signals from the actual standard EtherCAT I/Os (with the identifier -009x) to be safely transmitted to a TwinSAFE Logic-capable component and used there to check the plausibility of this analog signal and to use it in terms of safety using another diversified analog signal (usually up to PL d).

Another highlight of the introduction of the new controller generation is the incremental download. In contrast to its predecessor, the safety project now consists of four components (logic, parameters, mapping, info data), each of which has its own checksum. Thus, in the event of a change to the safety project, an effect analysis can be performed on the basis of these sub-checksums. This simplifies the validation and verification of the safety project. This division is also reflected in the extended user management, so that rights can now be granted on the basis of different components (e.g., a user who can only change the information data of a safety project).
Finally, the new generation of safety controllers now has a diagnostic history directly on the component. All errors that have occurred can be read directly from the component and evaluated.

The EL6910 is programmed using the TwinCAT 3 Safety Editor.

Special features:

analog value processing
incremental download
diagnostic history directly on the component
up to 212 safe connections
up to 128 TwinSAFE groups
up to 512 function blocks
up to 40 users
PROFIsafe master and slave support
TwinSAFE SC support
Technical data EL6910
Specification link unit between safe input and output signals
Protocol TwinSAFE/Safety over EtherCAT
Cycle time approx. 1 ms/according to project size
Fault response time ≤ watchdog time (parameterizable)
Current consumption power contacts –
Current consumption E-bus typ. 160 mA
Installation position horizontal
Safety standard EN ISO 13849-1:2015 (Cat. 4, PL e) and EN 61508:2010 (SIL 3)
Weight approx. 50 g
IP protection rating IP20
Ex marking IECEx:
Ex ec IIC T4 Gc
Housing data EL-12-8pin
Design form compact terminal housing with signal LEDs
Material polycarbonate
Dimensions (W x H x D) 12 mm x 100 mm x 68 mm
Installation on 35 mm DIN rail, conforming to EN 60715 with lock
Side by side mounting by means of double slot and key connection
Marking labeling of the BZxxx series
Wiring solid conductor (e), flexible conductor (f) and ferrule (a): spring actuation by screwdriver
Connection cross-section s*: 0.08…2.5 mm²,
st*: 0.08…2.5 mm²,
f*: 0.14…1.5 mm²
Connection cross-section AWG s*: AWG 28…14,
st*: AWG 28…14,
f*: AWG 26…16
Stripping length 8…9 mm
Current load power contacts Imax: 10 A
*s: solid wire; st: stranded wire; f: with ferrule

Contact us to discover more about the Modules by BECKHOFF code EL6910

Are you looking for BECKHOFF industrial components?

ICDCSPARES.COM offers new and overhauled original components, ready in stock to be shipped via DHL Express! Call us!

Check our Modules section to discover more about ICDC catalog: a wide selection of industrial spare parts, including Compressors, Flow Control Valves, UPS and Rotary Joints, besides Modules. ICDC offers online a wide selection of Electronic industrial components of the most important OEMs like EUGEN SEITZ, BECKHOFF, SKF, COPELAND and ALFA LAVAL beyond BECKHOFF.
ICDC,
Your Industrial One Stop Shop for Components!