EATON - NZM1-XRAV - Electrical Switches - ICDC-040896 - New

EATON – NZM1-XRAV – Electrical Switches – ICDC-040896 – New

Main Category: Electrical | Sub-Category: Switches | Status: New Original Components
EATON Part Number: NZM1XRAV | ICDC Internal Part Number: ICDC-040896

NZM1-XRAV Description:

SUPPLY PROGRAM
Assortment
Accessories
accessories
Rear drive
Standard / Approval
UL / CSA, IEC
Size
NZM1
Description
For direct, rear mounting of the switch on the wall or on the door of the electrical cabinet.
Rear operation of the switch through the wall or door of the electrical cabinet.
For lever switches
Degree of protection
IP66, UL / CSA Type 4X, Typ12
use with
NZM1, N1, NS1, PN1
Padlockability
padlockable in position 0 on the handle with max. 3 padlocks
Note
External label for danger can be inserted.

Not in connection with semi-removable plug system or remote control.

Not in connection with auxiliary contact / voltage release with terminals on the left side of the circuit-breaker

DESIGN VERIFICATIONS ACCORDING TO IEC / EN 61439
IEC / EN 61439 design verifications
10.2 Suitability of materials and components
10.2.2 Corrosion resistance
The requirements of the product standard are met.
10.2 Suitability of materials and components
10.2.3.1 Resistance of the enclosure to heat
The requirements of the product standard are met.
10.2 Suitability of materials and components
10.2.3.2 Resistance of insulating materials to normal heat levels
The requirements of the product standard are met.
10.2 Suitability of materials and components
10.2.3.3 Resistance of insulating materials to extraordinary heat levels
The requirements of the product standard are met.
10.2 Suitability of materials and components
10.2.4 Resistance to UV radiation
The requirements of the product standard are met.
10.2 Suitability of materials and components
10.2.5 Lifting
Not relevant as the whole electrical panel needs to be evaluated.
10.2 Suitability of materials and components
10.2.6 Impact test
Not relevant as the whole electrical panel needs to be evaluated.
10.2 Suitability of materials and components
10.2.7 Lettering
The requirements of the product standard are met.
10.3 Degree of protection of the enclosures
Not relevant as the whole electrical panel needs to be evaluated.
10.4 Airborne and superficial dispersion routes
The requirements of the product standard are met.
10.5 Protection against electric shock
Not relevant as the whole electrical panel needs to be evaluated.
10.6 Flush mounting of devices
Not relevant as the whole electrical panel needs to be evaluated.
10.7 Internal circuits and connections
It is the responsibility of the manufacturer of the electrical panel.
10.8 Connections for conductors introduced from outside
It is the responsibility of the manufacturer of the electrical panel.
10.9 Insulation characteristics
10.9.2 Dielectric strength at mains frequency
It is the responsibility of the manufacturer of the electrical panel.
10.9 Insulation characteristics
10.9.3 Impulse withstand voltage
It is the responsibility of the manufacturer of the electrical panel.
10.9 Insulation characteristics
10.9.4 Verification of enclosures in insulating material
It is the responsibility of the manufacturer of the electrical panel.
10.10 Heating
The superheat calculation is the responsibility of the electrical panel builder. Eaton provides equipment dissipation data.
10.11 Resistance to short circuit
It is the responsibility of the manufacturer of the electrical panel. Observe the default values ​​of the equipment.
10.12 EMC
It is the responsibility of the manufacturer of the electrical panel. Observe the default values ​​of the equipment.
10.13 Mechanical function
For the device, the requirements are met if the information in the installation instructions (IL) is observed.
TECHNICAL DATA ACCORDING TO ETIM 8.0
low voltage electrical appliances (EG000017) / Handle for protection switch (EC000229)
Technique Of Ar., Electr., Energy, Tecn. Switchgear, Network And Pipeline Processes / Low Voltage Switching Technology / Power Switches (Ns, <1 Hp) / Handle for Control Units ([email protected] [AKF012014 ])
with restart interlock
no
With key lock
no
lock with padlock
Yes
color
black
suitable for emergency stop
no
with axis
no
suitable for circuit breaker
Yes
suitable for load disconnector
Yes
type of protection (NEMA)
4X, 12
APPROVALS
Product Standards
UL489

Contact us to discover NZM1-XRAV. ICDCSPARES.COM offers new or overhauled original components, ready in stock to be shipped via DHL Express! Call us!

Check our Electrical section to discover more about ICDC catalog: a large selection of industrial spare parts including Fuses, Electric Motors, Switches and Switches.

Are you looking for industrial Switches?

ICDC offers online a wide selection of Switches of the most important OEMs like EATON, ABB and DANFOSS, besides EATON.

ICDC, Your Industrial One Stop Shop for Components!